Control Panel Building Mounting the Panel in the Enclosure Part 5 of 6

In this series we will walk through the steps of building an Industrial Control Panel. In this installment we'll go over mounting the panel in the enclosure and share some tips.

 

Our video on Installing a Through the Door Disconnect the Right Way will help you get the disconnect handle lined up with the shaft with no errors.

Next continue to Control Panel Building Testing and Finishing Touches Part 6 of 6 where we will talk about some finishing touches that should be done whether it will be a UL 508A control panel or not.

Next Steps

Go to the UL 508A Control Panel Lesson series to select your next lesson.  There are also many other Lesson Series on PLC Programming and Industrial Automation.

Information