Our industrial control panel trainer can be used to teach basic industrial wiring or as a foundation to add your own PLC to.
This is our popular Allen Bradley Micrologix 1100 PLC Trainer with RsLogix 500 Software and Lessons without the PLC.
The trainer requires 120VAC and plugs into your typical wall outlet.
Your trainer includes:
- Push Button - Your trainer comes with four push buttons. A green, yellow, and blue momentary push button and a red maintained mushroom button (note image does not show mushroom button). Each button has two normally open (NO) contacts and two normally closed (NC) contacts. The normally open contacts are color coded green and the normally closed contacts are color coded red on the back of the trainer.
- Selector Switch 2 Position - Your trainer has two 2 position selector switches. There is a normally open contact on each selector switch that closes when you turn the switch to the right (clockwise).
- Selector Switch 3 Position - Your trainer has two 3 position selector switches. There is a normally open contact for both the left and right position of the selector switch.
- Lights - Your trainer has four lights colored green, yellow, red, and blue.
- 24VDC Power Supply - Your trainer comes with a 24VDC 50 watt switching power supply. The trainer is designed for all switches, lights, relay/contactor, and even the heater to be powered by 24VDC making it much safer than 120VAC trainers.
- Terminal blocks - To make your trainer more realistic, we have included terminal blocks for connecting to the 24VDC power supply and the heater. You may add more as you customize your trainer.
These trainers are built to order and typically take 2-4 days to ship.
Product Description
Our industrial control panel trainer can be used to teach basic industrial wiring or as a foundation to add your own PLC to.
This is our popular Allen Bradley Micrologix 1100 PLC Trainer with RsLogix 500 Software and Lessons without the PLC.
The trainer requires 120VAC and plugs into your typical wall outlet.
Your trainer includes:
- Push Button - Your trainer comes with four push buttons. A green, yellow, and blue momentary push button and a red maintained mushroom button (note image does not show mushroom button). Each button has two normally open (NO) contacts and two normally closed (NC) contacts. The normally open contacts are color coded green and the normally closed contacts are color coded red on the back of the trainer.
- Selector Switch 2 Position - Your trainer has two 2 position selector switches. There is a normally open contact on each selector switch that closes when you turn the switch to the right (clockwise).
- Selector Switch 3 Position - Your trainer has two 3 position selector switches. There is a normally open contact for both the left and right position of the selector switch.
- Lights - Your trainer has four lights colored green, yellow, red, and blue.
- 24VDC Power Supply - Your trainer comes with a 24VDC 50 watt switching power supply. The trainer is designed for all switches, lights, relay/contactor, and even the heater to be powered by 24VDC making it much safer than 120VAC trainers.
- Terminal blocks - To make your trainer more realistic, we have included terminal blocks for connecting to the 24VDC power supply and the heater. You may add more as you customize your trainer.
These trainers are built to order and typically take 2-4 days to ship.
