AC Drive control panels are available in voltages of 115VAC, 230VAC, and 480VAC and sizes of 1/4 to 10 hp.
Variable Frequency Drives (VFD) are mounted in a NEMA 12 enclosure and includes two vents.
These control panels can be powered by single or three phase power. See chart below for amperage requirements.
|115VAC 1 phase||230VAC 1 phase||230VAC 3 phase||460VAC 3 phase|
|1/4 hp||6 amps||Use 1/2 hp||Use 1/2 hp||Use 1 hp|
|1/2 hp||9 amps||6.3 amps||2.9 amps||Use 1 hp|
|3/4 hp||Use 1 hp||Use 1 hp||Use 1 hp||Use 1 hp|
|1 hp||16 amps||11.5 amps||6.3 amps||4.2 amps|
|2 hp||NA||15.7 amps||8.8 amps||5.7 amps|
|3 hp||NA||27 amps||12.5 amps||6.0 amps|
|5 hp||NA||NA||19.6 amps||8.5 amps|
|7.5 hp||NA||NA||28 amps||14 amps|
|10 hp||NA||NA||NA||23 amps|
- No buttons - The drive can be configured to operate via the drive terminals or keypad
- Door mounted keypad - This option offers many options such as start stop control, reverse operation, and speed control knob
- Hand Off Auto - Switching the drive to Hand will cause it to run continuously or it will run in Auto when a contact closure is made to terminals inside the enclosure. This contact closure could be connected to a float switch, pressure switch, or any other ON/OFF discrete device.
UL Listed - Optional UL 508A listing available. Check the "UL Listed" box when configuring your product.